PRODUCTS

  • ➤Single Wire Control DIP 4PIN RGB LED

     

    Product Name Description Type
    ST300994 ST300994 is a LED which build in single wire driver. The operating voltage is 3V~ 4V。The flash pattern MCU generate signal to DI of 1st ST300994，then DO output pin from the 1st ST300994 output data to next ST300994，then one by one send all of data to each，all of LED can indicate the color what we want. ST300994 is designed PWM to drive RGB to show the gray degree of each color. DIP
    ST300968 ST300968 is R,G,B 3 colors LED combine with single wire control IC. The operating voltage is 3V~ 5V. LED drive current up to 20mA. ST300968 is designed by MCU transmit data to the first DI of ST300968. Through internal schematic to DO output then transmit to next ST300968. By the way send all the data to each ST300968. And all the ST300968 display all color and gray. ST300968 is designed PWM output to drive LED.  DIP

  • ➤Single Wire Control SMD 5050 RGB LED

     

    Product Name Description Type
    ST505094 ST505094 is a LED which build in single wire driver. The operating voltage is 3V~ 4V。The flash pattern MCU generate signal to DI of 1st ST505094，then DO output pin from the 1st ST505094 output data to next ST505094，then one by one send all of data to each，all of LED can indicate the color what we want. ST505094 is designed PWM to drive RGB to show the gray degree of each color. 5050
    ST505068 ST505068 is R,G,B 3 colors LED combine with single wire control IC. The operating voltage is 3V~ 5V. LED drive current up to 20mA. ST505068 is designed by MCU transmit data to the first DI of ST505068. Through internal schematic to DO output then transmit to next ST505068. By the way send all the data to each ST505068. And all the ST505068 display all color and gray. ST505068 is designed PWM output to drive LED.   5050

  • ➤2pin color control LED

    Product Name Description Type
    ST200699 1.High performance, high stability  2.PWM signal drive LED  3.Power series connection and carry signal   4.8bits each colorof R,G,B，total 16M  5.8bits address OTP type   DIP/SMD

  • ➤2pin color control LED

     

    Product Name Description Type
    ST2006101 ST2006101 is a 2 pin R G B LED and build in IC to soft mix color to implement synchronous forever function when parallel lots of LEDs.  DIP/SMD

  • ➤EL Driver IC

     

    Product Name Description Type
    DJ3004 DJ3004 is designed for driving EL on watch‘s back light. Single choke be used, and 1 diode, 2 transistors and 1 resister are necessary. DJ3004 support 2 pins--op1,op2 to select EL drive frequency. DICE
    DJ3009 20 cm2 Middle Size EL Back Light Driver With Frequency Adjustable and Delay. DICE    SOP-8
    DJ3022 DJ3022 is large size EL drive IC，The operating voltage is 1.5V ~ 5V. SOP-14
    DJ3025V2 10 cm2 Middle Size Single EL Driver IC, Flash or backlight. DICE    SOP-16
    DJ3113s DJ3113 is designed for driving EL on product‘s back light. The operating voltage is DC 1.5V and 3V . Single choke be used, and 1 diode and 2 transistors are necessary. DJ3113 supply a positive trigger pin.(non-retriggerable) Build-in delay time is about 3 sec. DICE

  • ➤EL low noise Backlight Driver IC, Build-in high voltage transistor

     

    Product Name Description Type
    DJ3004 DJ3004 is designed for driving EL on watch‘s back light. Single choke be used, and 1 diode, 2 transistors and 1 resister are necessary. DJ3004 support 2 pins--op1,op2 to select EL drive frequency. DICE
    DJ3009 20 cm2 Middle Size EL Back Light Driver With Frequency Adjustable and Delay. DICE    SOP-8
    DJ3022 DJ3022 is large size EL drive IC，The operating voltage is 1.5V ~ 5V. SOP-14
    DJ3025V2 10 cm2 Middle Size Single EL Driver IC, Flash or backlight. DICE    SOP-16
    DJ3113s DJ3113 is designed for driving EL on product‘s back light. The operating voltage is DC 1.5V and 3V . Single choke be used, and 1 diode and 2 transistors are necessary. DJ3113 supply a positive trigger pin.(non-retriggerable) Build-in delay time is about 3 sec. DICE

  • ➤ELs FLASH Driver IC

     

    Product Name Description Type
    DJ3020K 4 ELs Flash Driver. DICE
    DJ3020B.C.G 4 ELs Flash Driver. DICE
    DJ3020F 4 ELs Flash Driver. DICE
    DJ3052-1 6  ELs  multi function Flash  Driver IC DICE

  • ➤Two color flash driver IC

     

    Product Name Description Type
    DJ3123-1 DJ3123 is two color flash driver IC. Can drive R, G or R, B …etc LED. Automatic start when power on. The flash pattern is two color flash alternately.(1.5Hz) DICE
    DJ3123-2 DJ3123 is two color flash driver IC. Can drive R, G or R, B …etc LED. Automatic start when power on. The flash pattern is two color flash alternately.(1Hz) DICE
    DJ3123-3 DJ3123 is two color flash driver IC. Can drive R, G or R, B …etc LED. Automatic start when power on. The flash pattern is two color flash alternately.(1.5Hz 1/8Duty) DICE
    DJ3123-4 DJ3123 is two color flash driver IC. Can drive R, G or R, B …etc LED. Automatic start when power on. The flash pattern is two color flash alternately.( 4Hz, 1/8 duty) DICE

  • ➤RGB LED Driver IC

     

    Product Name Description Type
    DJ3053 DJ3053-1 is designed for driving R.G.B. LED mixer IC, It makes colors effects by 
    different LED color  and masking code    		 DICE    SOP
    DJ3078 DJ3078 is a LED flash for driving R,G,B 3colors IC。Initial off when power on, it flash with the internal ROM code after ON/OFF pin turn on. The flash pattern can be partial to be 4 sections total 64 bits ROM code. DICE    SOP
    DJ3105V2 DJ3105V2 is a LED IC to drive R,G,B LED to mix color. Good lamp structure to get better yield rate. While power on according internal 32 sector ROM code to flash or mix color. DICE    SOP
    DJ5094 DJ5094 Is may impel 3 kind of colors (RGB) LED to mix helps the color IC. After meets the power source the automatic start, namely in order outputs ROM of code according to internal, ROM code altogether 4*16 section. DICE
    DJ3058 DJ3058 is a LED control IC. KEY on/off control the LED on and flash by 2 steps. DICE

  • ➤Single Wires RGB LED PWM Driver IC

     

    Product Name Description Type
    ST313 ST313 is a programmable R,G,B LED IC。Suggest working voltage is 3V~ 5V。 LED drive current maximum up to 25mA。MCU data transmit to the first ST313’s DI then pass data to next ST313 after ST313 internal recognizing and encoding. And then transmit the data one by one to all of the ST313. After that MCU send a latch command to all of ST313 to tell all of ST313 to grab current data on each ST313.Then All of ST313 will change the exit R, G, B data to new data. SOP-8
    ST316 ST316 is R,G,B 4 colors LED driver IC。Operating voltage is 4V~ 6V。 ST316 is designed to transmit data from the MCU input to LDI input pin，through internal data shift register and output from DO，then transmit to next ST316，cyclic then put each data on each IC，and MCU output a latch command to every ST316 to latch data and show all the color on each RGB LED。 SOP-8

  • ➤Candle LED IC

     

    Product Name Description Type
    DJ3105V2-1B DJ3105V2-1B Is may impel IC which individually or two LED simulation candle flame glitters. Directly puts in on the LED support and the LED chip constitution candle lamp, the lamp structure good, good rate is good. DICE
    DJ3086VG-1E DJ3105V2-1B Is may impel IC which individually or two LED simulation candle flame glitters. Directly puts in on the LED support and the LED chip constitution candle lamp, the lamp structure good, good rate is good. DICE
    DJ5085-2 DJ5085 is specially LED IC which the LED candle lamp designs. Power up automatic start, lightens amber LED procedure of according to the internal hypothesis to simulate the lifelike effect which the candle swing and flash on and off. It has the ON/OFF key in addition to control or close the input pin which and the simulation blows out, and CDS control the function. DICE

  • ➤AC Synchronous Colorful LED IC

     

    Product Name Description Type
    DJ3095G-J DJ3095G-NXP is uses in the alternating current supply environment to be possible to impel 3 kind of colors (RGB) LED to mix helps the color IC. DICE
    DJ3115 DJ3113 is uses in the alternating current supply environment to be possible to impel 3 kind of colors (RGB) LED to mix helps the color IC. DICE

  • ➤Solar Power Garden Light IC

     

    Product Name Description Type
    ST308 ST308 is designed for low voltage power supply LED driver. CDS or solar cell control ON/OFF. Suitable used on garden light. DICE

  • ➤Synchronous IC

     

    Product Name Description Type
    DJ5175B DJ5175B soft mix color to implement synchronous forever function when parallel lots of LEDs. DICE

  • ➤AC Synchronous Colorful LED IC

     

    Product Name Description Type
    DJ3095G-X DJ3095-NXP is uses in the AC power supply environment to mix R, G, B LED be colorful IC.After power up and trigger then start action according to build in code to mix the color, The flash patterns divide eight section of altogether 64 bits mask ROM to be possible to coding to change different flash pattern demand of customer. DICE    SOP

  • ➤Sound music IC

     

    Product Name Description Type
    DJ3070 DJ3070 is in the one constructs 512 sounds string wave double sound music IC, uses the entire bridge design technology direct drive loudspeaker. Signal by way of interior several and analogy technology processing, by sine wave pattern actuation loudspeaker, DICE
    DJ3082 DJ3082 is in the one constructs 256 sounds string wave music IC, uses the entire bridge design technology direct drive loudspeaker. Signal by way of interior several and analogy technology processing, by sine wave pattern actuation loudspeaker. DICE